OPERATION
8
Tennant 2360 (09–01)
7. Plug power supply cord to a grounded wall outlet
(Figure 4).
Grounded Outlet
Grounding
Edge/hole
Grounded
3 Hole Outlet
Ground Pin
(120V)
(230V/240V)
FIG. 4
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
FOR SAFETY: Do not operate machine with the
use of an extension cord.
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
1. Adjust handle to a comfortable operating height.
Lift handle release lever and lower handle to
adjust. Release lever to lock handle in position, six
settings (Figure 5).
HANDLE
RELEASE
LEVER
FIG. 5
ATTENTION: Use caution when starting out.
Machine will jolt when twist grips are turned.
2. Start machine by pressing safety lock button and
turning twist grips forward. Release thumb from
safety lock button once machine starts (Figure 6).
FOR SAFETY: When using machine, go slow on
inclines and slippery surfaces.
SAFETY LOCK
BUTTON
FIG. 6
3. Once you begin operating machine, view pad
pressure meter and adjust pad pressure
adjustment knob if necessary. Operate machine
with meter needle in the green zone ONLY. Turn
knob counterclockwise to increase pad pressure
and clockwise to decrease (Figure 7).
PAD PRESSURE
ADJUSTMENT
PAD PRESSURE
METER
KNOB
FIG. 7
WARNING: Flammable materials can cause
an explosion or fire. Do not use.
ATTENTION: Keep machine moving to prevent
floor surface damage.
Home
Find... Go To..
