MAINTENANCE
3-3
235E MM165 (8--95)
RECOMMENDED FIRST 50-HOUR MACHINE INSPECTION
After the first 50 hours of operation, the following
procedures are recommended:
1. Check the floor skirts to floor clearance. See
SKIRTS AND SEALS
.
2. Check the side brush and main brush
patterns. See
BRUSHES
.
3. Change the gearbox gear lubricant and the
drain and fill/level plug seals.
4. Tighten the wheel nuts.
5. Replace the hydraulic fluid filter element.
6. Torque the rear wheel nuts in a star pattern
to 122 to 150 Nm (90 to 110 ft lb).
See
REAR WHEEL.
7. Perform all 50-hour interval lubrication and
maintenance procedures listed in the
MAINTENANCE CHART
.
Summary of Contents for 235E
