TM-197
9
Step 4. Set up the lower limit (Max.) for alarm
GO/NO-GO
1. The default value is 0G (0.0mT). Press
or
to modify and setup the default value.
2. Again, press
to go to Step 5.
If the min. value is more than the max.
value,
appears.
Step 5. Setup the measurement interval of alarm
GO/NO-GO
1. The default value is 2 seconds. Press
or
to modify and setup the default value.
2. Again, press
to go to Step 6.
Step 6. Setup year/month/date
1. Go to the mode to setup the year/month/date.
2. Press
or
to select the item to
modify, the digits of the selected item will flash.
3. Then, press
or
to correct the value.
4. Again, press
to go to Step 7.
Step 7. Setup hour/minute:
1. Go to the mode to setup the hour/minute.
2. Press
or
to select the item to
modify, the digits of the selected item will flash.
3. Then, press
or
to correct the value.
4. Again, press
to go to Step 8.
Step 8. Clear the manual record:
1.
Go to the mode to clear the manual record
LCD shows
.
