TM-197
8
5.12Manual range mode/Automatic range
mode
Press
to operate in the manual range mode
with the LCD showing
. This can change into two
different range modes.
Press and hold
for ≥ 2 seconds to return to
automatic range mode with LCD showing
.
5.13AC/DC Switching magnetic field
Press
to switch the measurement between AC
magnetic field and DC magnetic field.
5.14Setup
：
Step 1
~
Step 8
Press
to enter the setup procedure from step
1 to step 8, while
flashes on the LCD.
Step 1. Setup unit G or mT.
1. Press
or
to select the unit G or mT.
2. Again, press
to go to Step 2.
Step 2. Setup unit
℃
or
℉
1. Press
or
to select the unit ºC or ºF.
2. Again, press
to go to Step 3.
Step 3. Set up the upper limit (Max.) for alarm
GO/NO-GO
1. The default value is 20000G (2000.0mT). Press
or
to modify and setup the default
value.
2. Again, press
to go to Step 4.
