www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
www.mcmelectronics.com
TM
TM
Page <3>
V1.0
28/03/16
AT90DH Soldering Station
User’s Manual
LCD display
Introduction for LCD display:
1. SET: Set Temperature
2. REAL: Real Temperature
3. CAL: Calibration Temperature
4. Preset temperature of shortcut channel 11, when locked that will display “---”
5. Preset temperature of shortcut channel 12,when locked that will display “LDC”
6. Preset temperature of shortcut channel 13,when locked that will display “---”
7. Temperature Status Bar
8. °C display
9. °F display
10. Temperature display
Operation Instructions:
1. Connections
•
Connect the cord assembly to the receptacle.
• Place the soldering iron in the iron holder.
•
Plug the power cord first into the power supply, then into a properly grounded outlet.
2. Power on
Connecting the socket on the back panel to the plug and make the power switch on. LED displays the set temperature,
“Set” appearing. Three seconds later, “Real” can be viewed, and LED displays the real temperature. Meanwhile temperature
Unit °C or °F appear at the upper right corner.
