26
72-9490: OPERATING MANUAL
Figure 14
Figure 15
Figure 13
After summing up the current power measurement value
of the second phase, then press
SELECT
again to
choose tphase 3 as shown in figure 13.
The display shows the value of active power
KW and PG of 3.
If necessary press to get the sum of the power
measurement as shown in figure 14.
After summing up the current power measurement
value of the third phase, finally press
SELECT
again
to display the three phase sum of active power value
and reactive power value.
Press MAX/
or MIN/ as shown in figure 15 to step
through in sequence three phase sum of active power
and three phase sum of reactive power, and three
phasesumof power factor and three phase sum of
apparent power.
