18
14
Test of RPM
15
Indicates for units
Measurement Operation
AC/DC Voltage Testing
Warning
To avoid injury or damage to the meter from electric shock, please do not attempt to measure
voltages higher than 1000V, although readings may be obtained. Please take extra care when
measuring high voltages to avoid electric shock.
To measure DC voltage, connect the Meter as follows:
1. nsert the red test lead into the
V
terminal and the black test lead into the
COM
terminal.
2. Set the rotary switch to an appropriate measurement position in
V
press blue button to
switch between AC and DC measurement mode.
3. AC voltage measurement displays True RMS value. Press
Hz
button to obtain the frequency
value (refer to accuracy specifications for maximum ranges).
4. onnect the test leads with the object being measured. The measured value shows on the
display.
72-9280: OPERATING MANUAL
