Tenma 72-2630 User Manual Download Page 2

2

When using electrical appliances, basic safety precautions should always 

be followed to reduce the risk of fire, electric shock and injury to persons or 

property.

Read all instructions before using the appliance and retain for future reference.

• 

Check that the voltage indicated on the rating plate corresponds with that of the 

local network before connecting the appliance to the mains power supply.

• 

Do not operate this appliance with a damaged plug or cord, after a malfunction or 

after being dropped or damaged in any way.

• 

Check the product before use for any damage. Should you notice any damage on 

the cable or casing, do not use.

• 

This appliance contained no user-serviceable parts. All repairs should only be 

carried out by a qualified engineer. Improper repairs may place the user at risk of 

harm. 

• 

Do not block or obstruct the cooling fan vent opening.

• 

Avoid severe impacts or rough handling that leads to damage.

• 

Do not discharge static electricity. 

• 

This appliance can be used by children aged from 8 years and above and persons 

with reduced physical, sensory, or mental capabilities or lack of experience and 

knowledge if they have been given supervision or instruction concerning use of the 

appliance in a safe way and understand the hazards involved.

• 

Children should be supervised to ensure that they do not play with the appliance.

• 

Always disconnect from the mains when the product is not in use or before 

cleaning.

• 

Do not use the appliance for any purpose other than that for which it is designed.

• 

Do not operate or store in an environment of high humidity or where moisture may 

enter the product as this can reduce insulation and lead to electric shock.

IMPORTANT SAFETY INFORMATION

PRODUCT OVERVIEW
Main Features 

• 

Low noise, stepless speed cooling fan.

• 

Over temperature protection.

• 

Digital panel - 4 digit LED display.

• 

Software calibration.

• 

Audible output sounder.

• 

Key lock function.

• 

Overload and reverse polarity protection.

• 

5 pairs of memory function.

• 

Shutdown memory function.

• 

USB and RS232 interface (72-2635 and 72-2645 only).

Summary of Contents for 72-2630









Reviews: