4
OPERATION
DC voltage measurement (See Figure 2)
•
Turn the range selector to DC V, Auto and DC icons appear on the LCD.
•
Connect the black test probe to the cathode of the power to be measured and the
red test probe to the anode of the power to be measured.
•
Read measuring results displayed on the LCD.
•
If the probes are reversed polarity, then the LCD will display negative readings.
Figure 2
Figure 3
AC voltage measurement (See Figure 3)
•
Turn the range selector to AC V, Auto and AC icons appear on the LCD.
•
Connect the black test probe to the cathode of the power to be measured and the
red test probe to the anode of the power to be measured.
•
Read measuring values displayed on the LCD.
•
If the probes are reversed polarity, then the LCD will display negative readings.
Notes
:
•
Do not attempt to measure above 600V, you may get desired values, however, it
may risk damaging the meters internal wiring.
•
To avoid electric shock, please use it with extreme caution when measuring high
voltages.
•
Disconnect test probes from the circuit after finishing measurement.
