Inductance Measurement
1. Press
“
L/C/R
” button to select inductance measurement.
2. Connect the BNC ends of red clip or SMD Tweezers to “
SENSE +
”
and “
FORCE +
”, respectively.
3. Connect the BNC ends of black clip or SMD Tweezers to “
SENSE
-
” and “
FORCE -
”, respectively.
4. Connect the test clips to the component leads as required, or use
SMD Tweezers to measure SMD type component.
5. Press
“
FREQ
” button to select test frequency.
6. Press
“
D/Q/
θ
” button to select Q factor for secondary display.
7. Remove your hands from clips then read the display readings for
inductance value and quality factor.
u
ALWAYS DISCHARGE THE CAPACITOR BEFORE TESTING
ON
OFF
FORCE
FREQ
FORCE
HOLD
REC
RS232
SENSE
SENSE
L/C/R
P S
AUTO
RANGE
TOL
CAL
REL
Red clip
Figure- 22. Inductance Measurement.
22