4
●
Check every component after opening the package whether
everything is in good working condition. If there are any
damages suspected , don’t use the item and contact your
dealer.
●
Upon using, please make sure that the plug is properly
grounded . When moving the unit to another location, besure
to turn off the power switch and remove the plug.
●
Do not disassemble/modify unit, high voltage pressure inside
unit may cause damages.
●
Do not allow nozzle tip to touch board directly.
●
Unit produces heat, use under ventilated environment.
●
Disconnect plug when not to be used for a long period of
time.
●
Do not strike or subject to physical shock the main unit or any
parts of the system. Use carefully and lightly so as not to
damage any parts.
●
Be sure the unit is grounded. Always connect power to a
grounded receptacle.
CAUTION: Misuse may cause extensive damage to the unit.
For your own safety, be sure to comply with the following
precautions.
CARE and SAFETY PRECAUTIONS
9
Filter Pads
Nozzle cleaning pin
Filter Spring
General Guidelines:
●
Before usage dampen the filter pads with a little bit of water to
allow efficient air passage and filter action, re-dampen pads
frequently for maximum efficiency.
●
Routinely clean Spring Filter, and replace filter pads when
they are dirty or clogged .
●
The solder pathway can be cleaned using the provided Nozzle
cleaning pin, use the cleaning pin when pathway seems
clogged.
Disassembled illustration:
Filter barrel
cap
Spring Filter
Filter Barrel
Filter Pads
Filter Dock
De-soldering Gun
Body
Heating element
assembly
Nozzle
Tip lock cylinder
Heat guard
assembly
DESOLDERING GUN MAINTENANCE
