Tenker U80EH, Instruction Manual

Page: 13 / 132

10
Measurement
3. Month and date setting
Continue to above step, the screen will display xxMxxD and xxxx, and keep
flashing on month , the digit will increase 1 when press button MEM each
time, you could choose from 1 to 12. Press button SET when you
confirm the month, then it will set the date. Same as the month setting .
each time you press button MEM , the digit will keep changing from 01
to 31. Press button SET when you confirm the date, then it will enter into
the time setting mode.
4. Time setting:
Continue to above step, the screen will display xxMxxD and xx:xx, and keep
flashing on the digits of hour, the digit will increase 1 when press button
MEM each time, you could choose from 0 to 23. Press button SET when you
confirm the hour, then the digits of minute start to flash , same as the hour
setting , each time you press button MEM the digits will keep changing from
00 to 59. Press button SET when you confirm the minute, then the total
setting mode is completed.
Pre-measurement
Month setting
hour
setting
minute
setting
Date setting
Setting mode