
When the power, hot water and steam indicator are still-on, press the hot water button. At
this moment, the power/hot water indicators are still-on, and the steam indicator is off, now
it is ready for hot water function.
4.3.1 In the hot water mode, turn the knob to hot water/steam position. At this moment, the
machine starts to make hot water. When done, turn the knob back to the standby position,
and do not forget to press the hot water button again on the control panel to exit the hot
water mode.
4.2.2 In standby mode, turn the knob for coffee brewing. At this moment, the pump starts to
work for 2 seconds, then stop 2 seconds, and continue to work for 60 seconds before
auto-off. (After 1 minute brewing, the pump will stop automatically.) After that, turn the knob
to standby position to re-start the heating.
4.2.3 When the knob is in standby position, turn the knob to hot water/steam position, the
boiler will stop heating, the pump will not work, and hot water and steam indicator lights will
flash rapidly, at this moment, you need to turn the knob to the position of standby.
Power/hot water lights are
always on and steam lights are off
he power lamp is always
on and the two lights flash rapidly
Three lights are still-on.
Note:
When you need to pause or stop coffee brewing, just turn the knob back to
standby mode from coffee brewing position.
6
4.3 Hot water function:
Summary of Contents for TY006
Page 1: ...Co ee Maker TY006 User Manual...
Page 12: ......