background image

1. Read all instruction before using the heater.
2. Remove the unit form its packaging and check to make sure it is in good condition 
before using.
3. Do not let children play with pasts of the packing (such as plastic bags).
4. Check the household voltage to ensure it matches the heater's tailed specification.
5. Check the power cord end pt carefully before use to make sure that they are not 
damaged.
6. Before unplugging the power cord, be sure to turn off the power. When touching the 
unit be sure your hands are dry to prevent from electric shock,
7. Do not use near to, or point the heater to: furniture, curtains, or other inflammable 
objects. Keep combustible materials, such as furniture pillows, bedding, papers, 
clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them 
away from the sides and rear.
8. Do not block air intakes of exhaust in any manner to prevent a possible fire .
9. Extreme caution is necessary when any heater in used by, or near children or 
invalids, and whenever the heater is left operating and unattended.
10. Always unplug the heater when not in use.
11. Prevent water from getting into the housing of the heater during operation or in 
storage. Always store in a dry area free from potential moisture.
12. Do not uses in places where gasoline, paint, or other inflammable liquids are used 
or stored.
13. This heater is not intended for use in bathrooms, laundry areas, or similar indoor 
locations. Never locate the heater where it may fell into a bathtub or other body of 
water.
14. Do not run the cord under carpeting. Do not cover the cord with throw rugs, 
runners, or the like. Arrange the cord away from traffic areas and where it will not be 
tripped over.
15. Do not use on soft surfaces, like bed, where openings may became blocked.
16. Do not operate any heater with a damaged cord, damaged plug. after the heater 
malfunctions, or have has been dropped or damaged in any manner. Return the heater 
to an authorized service facility for examination, electrical or mechanical adjustment, 
or repair.
17. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as 
this may causes an electric shock or exhaust opening as this may causes an electric 
shock or fire, or damage the heater.
18. This healer is hot when in use. To avoid burns do not let bare skin touch the hot 
surfaces. If provided, use handles when moving this heater.
19. Use this heater only as described in this manual. Any other uses not recom-
mended by the manufacture may cause fire, electric shock, or personal injury and may 
void the warranty.

When using this appliance, basic precautions should always be 
followed to reduce the risk of fire, electric shock and injury, 
including the following:

IMPORTANT INSTRUCTIONS

Summary of Contents for DQ1007

















Reviews: