Tenergy 58062, User Manual

Page: 12 / 20

9
ADDITIONAL FUNCTIONS
How to silence the thermometer
To un-mute, simply repeat the above
steps again.
After taking a temperature reading (while the screen is still on):
Press the button once.
The icon will be displayed on screen,
to indicate mute mode is now enabled.
1
2
3
Room temperature thermometer mode
Press and hold the button for 5 seconds until the icon
show up at the upper corner, release the button.
Make sure the unit is powered off (screen is off).
Point the thermometer sensor toward the room.
You can use this unit to measure the indoor room thermometer using
the following steps:
1
2
3
The thermometer is now enabled in room temperature mode,
which enables the thermometer to measure from a wider range of
temperatures 32°F to 212°F. 4
Press the button to measure the ambient room temperature. 5
The thermometer will reset to forehead thermometer mode after
being powered off.
6
Note: Upon replacing the battery, memory records will be removed and temperature
units/mute settings will be reset to default.
Note: For better results using the room temperature mode. It is suggested to point the
thermometer toward walls without a source of heat, a few feet to get the best scan of
the environmental average temperature. Avoid pointing the thermometer at sources of
heat, such as a fireplaces, lamps, hot spots, and or direct sunlight.