54Mbps Wireless Long Range Wireless AP
MAC Address of AP3: Fill in the MAC Address of remote AP3;
MAC Address of AP4: Fill in the MAC Address of remote AP4;
MAC Address of AP5: Fill in the MAC Address of remote AP5;
MAC Address of AP6: Fill in the MAC Address of remote AP6;
4
Security Settings: To choose wireless data encryption mode, WDS
AP Repeater supports only WEP (Note: When you select “Disable”,
you are not able to use security mode.)
5 You could set WDS mode both as static modes, or as dynamic
mode, but you are not able to set it both as dynamic modes.
Please click “Finish” after configuration.
4.2.4.2 Deployment
Wireless Repeater Mode of TWL5401A Multi-layer AP: You are able to
realize the connectivity among the devices through setting the MCA address.
When the distance of two wireless networks exceeds the max range
allowed by the wireless network, or when there is big or high building which
affects the wireless connection between the wireless networks, you could
use wireless repeater solution to expand your wireless networks. The
Topology of WDS AP Repeater is as follows:
Figure17
4.2.5 Wireless Client Mode
Under this mode, you could connect the LAN port of TWL5401A to the NIC,
and then this TWL5401A could work as a wireless NIC.
18
Note: When you use this function, you should connect your TWL5401A
to the wired NIC or connect it to the wireless network. Because under this
mode,
TWL5401A
works
as
a
wireless
NIC, please set the IP
