123
b.
If you select
Enable(Scan)
in Bridge Action field:
Select the SSID of Router 1 (Tenda_112252) in
Remote Bridges MAC Address
field. If you cannot find the
SSID on the list, click
Refresh
to refresh the list.
Then click
Apply/Save
to save your settings.
After you fininsh the settings on Router 2 above, do as follows:
Configure Router 1:
①
Click
Advanced > Wireless > Wireless Bridge
.
②
Select
Access Point
in
AP Mode
field. (If you select
Wireless Bridge
here, the wireless devices will not be
able to connect Router 1 wirelessly.)
If
AP Mode
of Router 2 is
Access Point
, there are two ways to bridge Router 2.
a.
If you select
Enable
in Bridge Action field:
Enter the MAC address of Router 2 which you can check on
Wireless > Basic
interface, say
BSSID
(02:10:18:01:00:02).