10
11
IMPORTANT INFORMATION
• The gateway should not be sterilized.
• The gateway should not be used in an oxygen rich
environment.
• The gateway should not be used in presence of
flammable anaesthetics.
• Do not attempt to repair the gateway by yourself.
• Only use the power supply provided with the gateway.
• If the gateway connection cannot be established
it will not be able to send information and work as
expected. In such a case, please revert to a manual
process for checking the incontinence product. Check
the Troubleshooting section in this guide and if needed,
contact TENA SmartCare support.
• Do not open or modify the gateway. Doing so will result
in a void of warranty and can result in an unidentified
risk to patient, operator or third party.
• Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
• Save this user manual for future reference.
• If any changes to the installation are necessary, please
contact TENA SmartCare support.
• Devices shown are not actual size.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the in-
structions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
WARNINGS
IMPORTANT INFORMATION