2
3
CLICK!
Screws or
adhesive tape
10 m (33 ft)
x2
or
INFORMATION
SET-UP GATEWAY
x 2
x 2
Sensor Strip
Transmitter
Battery, CR2032
LED
Buttons
Quick Guide
Mounting
bracket
gateway
Power
Plug
LED light
Button
This guide is intended for Family Caregivers or Professionals
using the TENA SmartCare Change Indicator™
/MC
in a home
environment or a nursing home. The Change Indicator system
tracks and displays urine saturation levels in an absorbent
TENA incontinence product.
The TENA SmartCare Change Indicator is a system consisting of:
• an app, installed on one or more smartphones/handheld
devices.
• a reusable Change Indicator consisting of two parts;
a Sensor Strip and a Transmitter.
• a gateway that relays data from the Change Indicator.
Read the full TENA SmartCare Change Indicator
Instructions For Use before using the product.
REF
SN
IP65
FCC ID:
IC:
UDI:
MD
10
40
Symbols used in this guide:
WARNING
Care shall be taken to ensure safety and efficiency.
Failure to do so could cause damage to equipment
or lead to the receipt of incorrect data.
NOTE
Important information or advise/tip
REF
SN
IP65
FCC ID:
IC:
UDI:
MD
10
40
Parts you need to set-up gateway:
CLICK!
Screws or
adhesive tape
10 m (33 ft)
x2
or
Placement
CLICK!
Screws or
adhesive tape
10 m (33 ft)
x2
or
1
3
Alternative
placement
NOTE
The gateway should be within 10 m (33 ft) of
the user and connected to an electric power
outlet to use the TENA SmartCare Change
Indicator System.
REF
SN
IP65
FCC ID:
IC:
UDI:
MD
10
40
NOTE
• If an internet connection cannot be established
please try to change location of the TENA
SmartCare gateway.
• It is preferred that the gateway is placed so it
has clear line of sight towards the Transmitter.
REF
SN
IP65
FCC ID:
IC:
UDI:
MD
10
40
2
CLICK!
Screws or
adhesive tape
10 m (33 ft)
x2
or
CLICK!
Screws or
adhesive tape
10 m (33 ft)
x2
or