Using naviPlay with Self-Powered Speakers or a Stereo
Connect the naviPlay Stereo Headset to your self-powered speakers and your iPod music fills the room.
1. Attach your iPod to the naviPlay adapter.
2. Turn on the naviPlay adapter, remote, and iPod.
3. Connect audio cables to the audio inputs on your speakers (or stereo system with a
compatible audio input).
4. Connect the other end of the audio cables to the headphone jack on the naviPlay remote.
5. Select the audio track on your iPod and press PLAY to listen to your music.
Sit back with your iPod in-hand, attached to the naviPlay adapter of course, and use it as a
remote control for your stereo system.
Using the naviPlay Adapter With Other Bluetooth Devices
The naviPlay adapter and remote are “paired” at the factory-pre-configured to automatically
communicate with each other. You can also use the naviPlay adapter with other Bluetooth stereo
headphones. Go to
www.tentechnology.com
for the latest information on compatible Bluetooth-
enabled devices. The headphones must support A2DP (Advanced Audio Distribution Profile).
To use the naviPlay Adapter with other Bluetooth-enabled headphones, you must first pair the
two devices. To pair the adapter to the headphones:
1. Turn off the naviPlay adapter and the Bluetooth headphones.
19
Using naviPlay Headset with Other Bluetooth-Enabled Devices
