TEN
TEN Automotive Equipment Ltd.
©
Page 32
Version 5.0 November 2010
Set date / time
The INNOVA 3000 has its own internal system clock which monitors the calibration interval and endorses test
reports with date and time, etc. It is only possible for the User to change the time for
“daylight saving” seasonal
adjustments. Changes to the system date cannot be implemented at the point.
The actual date and time are continuously displayed at the top of the screen. To change the system time, select the
edit boxes at the bottom of the screen by pressing the Tab key. Enter the new time in the form hours : minutes :
seconds and press Apply (or F7 on the keyboard) to accept the new time. To restore the time to its previous value,
press the 'Restore' key (F8 on the keyboard). After changing the system time, press the 'Abort' key (F2 on the
keyboard) to return to the User menu.
Please note that the time set is not the PC time clock but the INNOVA 3000
’s own internal clock. When you change
your PC clock the time of the INNOVA 3000 will not change!
