17
12. OPERATION OF THE SYSTEM (quick guide)
1. Switch on your TV set and the receiver.
2. To power-on the system, press the key
at the control device.
From now on everything else up to the picture transmission
will be fully automatic.
In principle, at first the antenna extends into the last receiving position.
If you are using the system for the first time and/or if you have changed
your location, then the system cannot evaluate a picture in the last
receiving position and it starts the "fully automatic search" mode.
Subsequently, you will immediately get your TV picture.
If you have already used the system at the same location and in the same
vehicle position, then it will receive immediately in the last reception
position without searching.
German-language programming is usually transmitted over the Astra1
satellite which can also be received in most parts of Europe with a dish
size of 65 cm.
In some regions (e.g. in parts of Greece or in Turkey), the Astra satellite
transmits no sufficiently strong signals and therefore cannot be received.
In this case, select another search satellite, e.g. Hotbird/Eutelsat (see
detailed operating instructions).
After successful satellite identification, you can change programmes with
your receiver’s remote control.
The system is switched off by pressing the key
at the control device.
The system then retracts and switches off.
