INTRODUCTION
The Temspec unit ventilator was designed as a means for providing heating, cooling and
ventilation to the classroom. Our goal is to help create an enhanced learning environment
by focusing on the following points when designing our equipment:
•
TEMPERATURE & HUMIDITY CONTROL
•
AIR DISTRIBUTION
•
SOUND ATTENUATION
By introducing the vertical unit ventilator into the classroom, superior control can be
obtained for each room. Because of the unit’s ducting capabilities, an even distribution of
air can be achieved throughout the room. The unit ventilator is constructed with heavy
guage metal and sound absorbing insulation for optimal sound attenuation.
By applying sound engineering principles and through continuous testing, the highest
quality of performance is obtained in the unit ventilators.
-1-
ABOUT THE UNIT VENTILATOR
NOMENCLATURE FOR UNIT VENTILATORS WITH SELF-CONTAINED COOLING
V LC
Vertical Unit
LC = Low Condensing Section
HC = High Condensing Section
36
24 = 2.0 tons of Cooling
30 = 2.5 tons of Cooling
36 = 3.0 tons of Cooling
48 = 4.0 tons of Cooling
60 = 5.0 tons of cooling