.16.
INSTRUCTION MANUAL
•
The first touch on
or
mark will recall the previous set temperature displayed.
•
Touch the mark
to increase the set temperature by 1
ºC (or by 1ºF)
. On the
contrary, touch the mark
to decrease the set temperature by 1
ºC (or by 1ºF)
.
For Dual Zone
•
The default temperature setting ranges are : 5-12
ºC
(41-54
ºF
) for the upper zone
and 12-20
ºC
(54-68
ºF
) for the bottom zone.
•
You need to select the set zone by touching the mark
before touching the mark
or
to set the desired temperature. The zone temperature will flash when it is
ready to be set.
•
The first touch on mark
or
will recall the previous set temperature displayed
in the digital window.
•
Touch the mark
to increase the set temperature by 1
ºC (or by 1ºF)
. On the
contrary, touch the mark
to decrease the set temperature by 1
ºC
(or by 1ºF).
SELECTING FAHRENHEIT(ºF) & CELSIUS (ºC) DISPLAY
For Single Zone
Touch the marks
with 2 fingers at the same time and hold for 5 seconds, you
can interchange the Fahrenheit and Celsius display.
For Dual Zone
Directly touch the mark
, you can interchange the Fahrenheit and Celsius display
for both zones at the same time.
* For
models WP2DQ60DCB and WP2DQ60DCS
, the Celsius and Fahrenheit of Left and
Right Zone will be changed at the same time no matter the operation above on Left or
Right Zone.
FUNCTION INDICATING LIGHT
For Single Zone
Function
Indicator
o When the compressor starts to work, the Indicator will stay
on;
o In other conditions, the Indicator will be off.