.15.
INSTRUCTION MANUAL
Warning: To avoid damaging the compressor, please do not turn on the
appliance again within 5 minutes after you turn it off.
UNLOCKING THE CONTROL PANEL
•
To unlock the control panel, touch the power mark and lighting mark
with 2 fingers at the same time and hold for
3 seconds
. When unlocked a buzz sound
will be heard.
•
The control panel will be automatically locked with a buzz sound heard after
10
seconds
without being touched.
•
Under the locked condition, the control panel will not react to any touching order for
Lighting On/Off and Temperature Setting.
INTERIOR LIGHTING ON/OFF CONTROL
•
Under the unlocked condition, touch the lighting mark
to turn on (or turn off) the
interior cool LED lighting.
•
The lighting will stay on unstil it is manually turned off.
TEMPERATURE DISPLAY WINDOW
•
The temperature is displayed in digital which is the best way to be read out. The
digital is shown as the set temperature when you are setting the temperature.
•
Model WP2DQ60DCB and WP2DQ60DCS will show actual temperature after you set
the temperature.
•
When the temperature probe is out of order, the display window will show with “
HH
”
or “
LL
” instead of a digital figure while continuous buzz sound will be heard. In case
of this happens, this appliance is considerately designed to keep periodical running
of compressor and fans which helps to keep the coldness of the inside cabinet to
protect your stored wines.
Warning:
To avoid destroying your stored wines, it is strongly recommended
to have the appliance repaired immediately, as the spare periodical running
can not ensure the appliance to achieve the temperature you have set.
TEMPERATURE SETTING
For Single Zone
•
The default temperature setting range is : 5-20
ºC
(41-68
ºF
).
•
Directly touch the
or
mark to set the wine cooler temperature as you want.