OFL100
11
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
Parameter Settings
Wavelength:
The wavelength can be set to
1310nm or 1550nm.
Range:
The range can be set to capture the entire
ƬEHUOLQNOHQJWK
3XOVHZLGWK
Refers to the time width of the optical
pulse signal emitted during test. The larger the pulse
ZLGWKWKHVWURQJHUWKHRSWLFDOSRZHULQMHFWHGLQWRWKH
RSWLFDOƬEHUWKHVWURQJHUWKHEDFNVFDWWHULQJVLJQDO
RIWKHRSWLFDOƬEHULVDQGWKHIDUWKHUWKHHƪHFWLYH
detection distance of the OTDR can be. However, the
large pulse width will cause saturation of the initial
UHƮHFWLRQVLJQDODQGDORQJHUGHDG]RQH7KHFKRLFHRI
SXOVHZLGWKLVUHODWHGWRWKHOHQJWKRIWKHRSWLFDOƬEHU
The longer the length, the larger the pulse width,
ZKLFKFDQRQO\EHPRGLƬHGLQUHDOWLPHDYHUDJH
measurement mode.
IOR:
The Index of Refraction is provided by optical
FDEOHƬEHUPDQXIDFWXUHUDQGFDQEHIRXQGRQWKH
LQGLYLGXDOVSRRORIƬEHU7KHWHFKQLFLDQFDQHQWHUWKH
IOR for the most accurate measurements.
Test time:
8VHGLQWKHDYHUDJHWHVWPRGHWRVHWWKH
total averaging time. A longer averaging time will
result in the best signal to noise ratio.
Unit:
8VHGWRVHOHFWWKHGHVLUHGXQLWVWRNPNIHHW
or miles.
2)/3XOVHZLGWK6HOHFWLRQ
