Page 4
Display
A
[Current time, Start/Stop Time] Display
Displays the current time as well as the start & stop time programmed.
B
[Key Lock] Display
Indicates when the Key Lock function is activated.
C
[Session / Bypass] Display
Indicates session number when setting Timer (1, 2 or 3), or
number of hours of operation when setting Bypass operation (H1, H2 or H4).
D
[Fan Speed] Display
Displays the fan speed setting [Auto/High/Medium/Low].
E
[Operation Mode] Display
Displays the current mode of operation.
F
[Sleep] Display
Displays the sleep/energy saving status.
G
[Swing] Display
Displays the air swing status (NB not applicable to ducted systems).
H
[
°
C] Display
Displays the temperature in degrees Celcius.
I
[On/Off status] LED Display
Displays the status of operation.
J
[Set temperature or room temperature] Display
Displays the set or room temperature.
K
Infra Red Receiver for optional remote control.
SLEEP
FAN
MODE
SET TEMP.
SWING
ON TIMER
OFF TIMER
DAY
HOUR
MINUTE
CLOCK
ON/OFF
AUTO
DRY AUTO COOLHEATFAN
SLEEP
SWING
F
C
ROOM
TEMP.
MON TUE WED THU FRI SAT SUN
AM
PM
ON
OFF
❄
TIMER ACTIVE
SET TIMERSET CLOCK
KEY LOCK
TIMER ACTIVE
H 4
A
B
D
E
F
K
H
G
J
I
C
Page 9
Flip open the door on the remote control to
reveal additional function buttons.
SWING
Press to activate or deactivate the air louvre
sweep function.
(NB This function is only applicable to
systems with underceiling indoor units).
SLEEP
Press to activate the energy saving Sleep
function which automatically adjusts the
temperature to provide a more comfortable
sleep, ie for use in bedrooms.
ON TIMER
The timer allows the user to confine air
conditioner operation to a selected duration
over a single 24 hour period.
Press
to activate ON TIMER and
to deactivate it.
The first press of
button will show
the previous setting and the ON symbol
will flash.
Further pressing of the button will advance
the time setting in 30 minute intervals.
OFF TIMER
Press
to turn the air conditioner OFF
when the current status is ON, or to set a
future OFF time (within 24 hour period).
Button operation is similar to the ON TIMER
instructions above. If an OFF time is not
set the system will run continuously, or
until the ON/OFF button is pressed.
CLOCK
Press
or
for 2 seconds to
activate. The current clock setting will
decrease/increase at 1 minute intervals on
each press.
The speed of interval updating increases
after 4 seconds of continuous key press.
It will update at high speed after 6 seconds
of continuous key press.
AUTO
Note: Use of the Remote Control's timer
functions overrides the wall plaque's own
timer settings, specifically the one regular
session per week (refer page 6).