Setting Temperature Readings to Fahrenheit or Celsius (Option *)
The Temperature Guard can report the temperature in Fahrenheit (default) or Celsius. To switch to
Celsius, perform the steps below. (Please note switching from Fahrenheit to Celsius does not change
the temperature limits you set. )
1 From the Program Menu, press
*
2 You will hear the current setting. Default is “C off”, the temperature is being output in degrees
Fahrenheit.
3 You will hear “
Press one to change.”
4 Press
1
if you wish to change the Temperature Readout Mode and have the temperature output in
Celsius.
5 You will hear the new setting, “C on”.
6 You will be automatically returned to the Program Menu
Programming Temperature Limits
Model VM500-3
1 From the Main Menu, press 2 to Set Limits
2 You will hear the current low limit (i.e. “
Lower limit is 45
°
”)
3 You will hear “
Press 1 to change
”
4 Press
1
to make a change
or any other button to skip to step 8
5 You will hear “
Enter number then press pound”
6 Enter the temperature (Valid limits are 35° to 125° F), then press the pound sign.
7 You will hear the value you just entered (i.e. 4
5
°)
8 You will hear the current upper limit (i.e.
“Upper limit is 85
°
")
9 You will hear “
Press 1 to change
”
10 Press
1
to make a change or any other button to return to the Main Menu
11 You will hear “
Enter number then press pound”
12 Enter the temperature (Valid limits are 35° to 125° F), then press the pound sign.
13 You will hear the value you just entered (i.e. 95°)
14 You will be returned to the Main Menu
Model VM500-3HT ONLY
1 From the Main Menu, press 2 to Set Limits
2 You will hear "Press 1 for temperature or 2 for humidity"
3 Press 1 for temperature
4 Proceed to step 2 above
4
