background image

FCC PART 68 INFORMATION      

This equipment complies with Part 68 of the FCC Rules. The FCC Part 68 Label is located 
on the bottom of the unit.  This label contains the FCC Registration Number and Ringer 
Equivalence Number (REN) for this equipment. If requested, this information must be 
provided to your telephone company. 

 

The REN is useful to determine the quantity of devices you may  

connect to your telephone line and still have all of those device 

ring when your telephone number is called. In most, but not all 

areas, the sum of the RENs of all devices connected to one line  

should not exceed five (5.0). To be certain of the number of de- 

vices you may connect to your line, as determined by the REN,  

you should contact your local telephone company to determine the 

maximum REN for your calling area. 

 

Connection to the telephone network should be made by using standard modular tele-
phone jacks, type RJ11. The plug and/or jacks used must comply with FCC Part 68 rules. 
If this telephone equipment causes harm to the telephone network, the telephone company 
will notify you in advance that temporary discontinuance of service may be required. But if 
advance notice isn't practical, the telephone company will notify the customer as soon as 
possible. Also, you will be advised of your right to file a complaint with the FCC if you 
believe it is necessary.  

     

The telephone company may make changes in it's facilities, equipment, opera-

tions or procedures that could affect the proper functioning of your equipment. If they do, 
you will be notified in advance in order for you to make necessary modifications to main-
tain uninterrupted service. 

 

This equipment may not be used on coin service provided by the telephone 

company. Connection to party lines is subject to tariffs. 

 

If trouble is experienced with this unit, for repair or warranty information, please 

contact customer service at the address listed below. If the equipment is causing harm to 
the network, the telephone company may request that you disconnect the equipment until 
the problem is resolved. 

 

 

DO NOT DISASSEMBLE THIS EQUIPMENT. It does not contain any user 
serviceable components. 

 

 

Attn.:  CUSTOMER SERVICE DEPT. 

 

Microtechnologies, Inc. 

 

123 Whiting St.  Unit 1A 

 

Plainville, CT  06062 

 

 

  

14 

Summary of Contents for VM500-3

















Reviews: