18 |
ZPOINT Rev 1.0 | http://www.temperaturealert.com/ | © 2013 Temperature@lert
Troubleshooting
Common Problems
Failure Light is Flashing
Enter signal strength indicator mode to determine if you have adequate
cellular service in the area of operation.
Contact Temperature@lert support if you require further assistance.
Warning Light is Flashing
A warning light does NOT indicate a fault or failure. The device is still
transmitting successfully as long as the red failure light is not flashing. The
warning lights serve to alert you of a potential problem.
The battery charge may be low. Unscrew the bottom of the case and replace
the batteries.
The signal strength from the selected installation site may be low. Use signal
strength indicator mode to find a more suitable location if needed.
