12 |
ZPOINT Rev 1.0 | http://www.temperaturealert.com/ | © 2013 Temperature@lert
Warning Light
The warning light will normally be off. However, the warning light will flash
once 30 few seconds to indicate the unit’s internal battery is low. The warning
light will flash twice every 30 seconds to indicate a low wireless signal. Your
unit is operating normally even if the warning light is flashing.
Failure Light
When operating properly, the failure light will be off. However, the failure light
will flash twice every 30 seconds to indicate there was a problem sending the
temperature over the wireless network. If the failure light is flashing, your
device is not functioning. Please refer to the troubleshooting section of this
manual.
Light Indicator Reference Table
Single Blink
Double Blink
Status
Power On
Transmitting
Warning
Low Battery
Low Wireless Signal
Failure
Wireless Trouble
