Temper ICASA KAP-02-WIFI, Manual

Page: 30 / 64

Display Interface
Install filter screens
Before using this product, remove all packages of filter screens according
to the following procedures, and put them in the product.
Note
There is a group of filter screens at each side of the product. Each side is
equipped with a pre-filter screen and an air purification filter screen; make
sure to put the air purification filter screen in the product firstly, and then
put the pre-filter screen. Keep the side with a zipper pull toward you.
1. Remove all
packaging materials
of the air purification
filter screen.
2.
Pull out the upper
part of the side
panel to remove it
from the product.
3. Press down the 2
attaching clamps, pull
the pre-filter screen
toward you.
4. Put the unpacked air
purification filter
screen back to the
product.
5. Put the pre
-
filter
screen back to the
inside of this
product.
6. Reinstall the side panel;
install the panel at
bottom of the product,
and then push the panel
lightly.
7. Repeat the aforesaid procedures to assemble the air purification filter screen at
the other side of the product.