PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Select timer to be displayed as show
in timer display selection
Press SEL
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Display indicates timer 1
set point 2 will be displayed
if no more keys are pressed
Press /\ to change to the set
point of thenext timer.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
If no further keys are
pressed, the set point of the
currently selected timer will
be shown for 2-3 seconds.
(timer 1, time 2 in this case)
Display indicates timer 1
set point 1 will be displayed
if no more keys are pressed
Press SEL to change to the
second set point of this timer.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
FOR CYCLE TIMER
AND DELAY ON -
DELAY OFF
MODES ONLY
(cct)
(dodo)
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Display indicates access
to timer 2, set point 2.
Press SEL to change the
first digit of the set time.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
If no further keys are
pressed, the set point of the
currently selected timer will
be shown for 2-3 seconds.
(timer 2, time 1 in this case)
Display indicates access
to timer 1, set point 1.
Press /\ to change to the set
point of the next timer.
The display will then revert to showing the
actual value of the currently selected timer
The display will then revert to showing the
actual value of the currently selected timer
SET POINT DISPLAY
Press SEL
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Display indicates timer 1
set point 1 will be displayed
if no more keys are pressed
Press /\ to change to the set
point of the next timer.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Display indicates timer 2
set point 1 will be displayed
if no more keys are pressed
Press /\ to change to the set
point of the next timer.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Use /\ or V keys to set the
first digit to the required
time. Press SEL to move to
the next digit and repeat for
each digit.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
When the desired time has
been set, press PRG.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
The digit will stop flashing
and the display will revert to
showing the actual value of
the currently selected timer.
FOR CYCLE TIMER
AND DELAY ON -
DELAY OFF
MODES ONLY
(cct)
(dodo)
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Display indicates access
to timer 2, set point 1.
Press SEL to change the
first digit of the set time.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Use /\ or V keys to set the
first digit to the required
time. Press SEL to move to
the next digit and repeat for
each digit.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
When the desired time has
been set, press PRG.
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
The digit will stop flashing and
the display will revert to showing
the actual value of the currently
selected timer (single timer
modes only).
SET POINT ADJUSTMENT
Press PRG
PRG
SEL
UMT
OP1
OP2
OP3
OP4
OP5
Supply
Supply
OP
OP
Input
Input
T
T
T1
T1
T1
T1
T1
T1
T2
T2
T2
T2
T2
T
T
T
T
T
T
T
T
T
T
T
dE (CtS)
dE (PtS)
dE (Ptr)
Int (CtS)
Int (PtS)
Int (Ptr)
cct
dodo
dd
TIMING MODES