TempAlert Ethernet Gateway
User Manual
www.tempalert.com
Tel: (866) 524-3540
Page
16
of
22
TempAlert Ethernet Gateway User Guide v 4.22
186 Lincoln Street, 8
th
Floor, Boston MA 02111 | p: (866) 524-3540 | f: (866) 415-9884 | www.tempalert.com | [email protected]
•
Wireless sensors that are not within range of a gateway for an extended period of time
will experience a decrease in battery life. If you are using the wireless sensors in those
conditions, make sure you have low battery alert notifications setup.
Changing the Batteries
The status of the batteries can be seen from the Wireless Sensor view page on the Insights™
monitoring dashboard. In addition, you can setup a low battery alert notification to notify you
when the batteries are low on power. To change the batteries, carefully unscrew the cover.
Remove the two AA batteries and replace them with the same type (two Energizer Advanced
Lithium AA Batteries). Standard alkaline cells can be used, but they will not perform well in cold
conditions and will provide a much shorter lifespan.
