3
Temco DV1000/1200/1400MBN Series
76658
A manufactured (mobile) home OEM installation must conform
with the Manufactured Home Construction and Safety
Standard, Title 24CFR, Part 3280, or, when such a standard
is not applicable, the Standard for Manufactured Home
Installations, ANSI/NCSBCS A225.1, or Standard for Gas
Equipped Recreational Vehicles and Mobile Housing, CSA
Z240.4
This gas appliance must be installed by a qualified installer in
accordance with local building codes or, in the absence of
local codes, with the current CSA B149.1 Installation Code (in
Canada) or the current National Fuel Gas Code Z223.1 when
installed in the United States.
This appliance, when installed, must be electrically connected
and grounded in accordance with local codes or, in the
absence of local codes, with the current CSA C22.1 Canadian
Electrical Code or with the National Electrical Code: ANSI/
NFPA 70-1987 when installed in the United States.
FOR SAFE INSTALLATION AND OPERATION
PLEASE NOTE THE FOLLOWING:
1 . This appliance gives off high temperatures and should be
located out of high traffic areas and away from furniture
and draperies.
2.
Children and adults should be alerted to the hazards of
the high surface temperatures of this appliance and
should stay away to avoid burns or ignition of clothing.
3.
Children should be carefully supervised when in the same
room as your fireplace.
4.
Under no circumstances should this appliance be modi-
fied. Parts removed for servicing should be replaced prior
to operating this appliance again.
5.
Installation and any repairs to this appliance must be
performed by a qualified installer, service agency or gas
supplier. A professional service person should be con-
tacted to inspect this appliance annually.
6.
Control compartments, burners and air passages in this
appliance should be kept clean and free of dust and lint.
Make sure the gas valve and pilot light are turned off
before you attempt to clean this unit.
7.
The venting system (chimney) of this appliance should be
checked at least once a year and if needed your venting
system should be cleaned.
8.
Keep the area around your appliance clear of combustible
materials, gasoline and other flammable vapor and liquids.
This appliance should not be used as a drying rack for
clothing, nor should Christmas stocking or decorations be
hung in the area of it.
9.
Under no circumstances should any solid fuels (wood,
coal, paper or cardboard etc.) be used in this appliance.
10. For safe operation, the glass door must be closed.
11. Do not use this heater if any part has been under water.
Immediately call a qualified service technician to inspect
the heater and to replace any part of the control system
and any gas control which has been under water.
12. Do not operate appliance unless completely installed as
per installation instructions.
Installation & Operating Instructions
IMPORTANT:
PLEASE READ THE FOLLOWING CAREFULLY
It is normal for fireplaces fabricated of steel to give off
some expansion and/or contraction noises during the
start up or cool down cycle. Similar noises are found
with your furnace heat exchanger or car engine. It is
not unusual for your gas fireplace to give off some odor
the first time it is burned. This is due to the manufactur-
ing process.
Please ensure that your room is well ventilated
-open all windows.
It is recommended that you burn your fireplace for at
least four (4) hours the first time you use it. If the
optional fan kit has been installed, place the fan switch
in the “OFF” position during this time.
WARNING: When purging the gas line, the glass
front must be removed.
The embers supplied with your fireplace are made
from a high grade rock wool and should be
handled carefully. Wash your hands immediately
after touching to avoid irritation. The embers must
be placed correctly in order to function properly.
This appliance may be installed as an OEM
installation in a manufactured (mobile) home and
must be installed in accordance with the
manufacturer’s instructions and the manufactured
home construction and safety standard, Title 24
CFR, part 3280 or Standard for Installation in
Mobile Homes, CAN/CSA Z240 MH.
This appliance is only for use with the type of gas
indicated on the rating plate. A conversion kit is
supplied with the appliance.
13. This appliance may be used in a bedroom installation.
Install in accordance with local building codes and
regulations.
14. Never use your appliance as a cooking device.
