TEM TM11 Series Instruction Manual Download Page 4

 

 

 

 

 

Warranty

 

 
The manufacturer provides a warranty to the buyer for the properties and the fault-free operation of their products for a 
period of 5 (five) years from the date of purchase. 
The manufacturer undertakes to remedy any defect in the product which would occur within the warranty period, at their 
own expense or by a qualified service technician, within a reasonable time, which shall not exceed 45 days from the receipt 
of the advertised product and the buyer's written notification of the error, or to deliver to the buyer a new product of the 
same type and at least of the same quality within the stated time. 
The  warranty applies to defects in product performance  resulting from defects in the  materials used and defects in the 
manufacturing  process,  provided  that  the  product  has  been  installed  and  used  in  accordance  with  the  manufacturer's 
instructions. 
The warranty is valid in the territory of the EU Member States. 
The manufacturer's warranty does not apply in the following cases: 
- use of the product in contravention of the manufacturer's instructions and in the event of non-compliance with the safety 
instructions; 
- the use of the product for purposes other than those intended; 
- incorrect installation of the product; 
- mechanical damage and defects resulting from a fault of the manufacturer; 
- injuries and defects caused by natural disasters (lightning, earthquake, fire, flood, etc.) or by accident; 
- damage and malfunctions resulting from an unsuitable power line (e.g. electric shock, etc.); 
- repairs or tampering with the product by a person not authorized by the manufacturer; 
- any modifications to the product. 
The guarantee is valid only on the condition that the original invoice is attached.

          

 

 

Instructions for disposal after use

 

 

Compliant with RoHS 2011/65/EU 

The  product  does  NOT  contain  substances  restricted  by  the  RoHS  in  excess  of  maximum  permissible 
concentrations. 

End-of-life products contain recyclable materials and are not household waste.  Dispose of the 

product at the end of its service life in accordance with applicable legal requirements. 

 

 

 

Summary of Contents for TM11 Series

Page 1: ...assemble the product as this will void the warranty If not properly installed the product may be permanently damaged The product is intended for indoor use and in covered outdoor areas in the temperature range between 20 C and 45 C It should not be exposed to moisture rain or water The product is used for an alternating current of up to 250 V and the current should not exceed the values indicated ...

Page 2: ...on instructions Hard wire or soft wire conductors of 1 5 mm2 to 2 5 mm2 are used for the electrical connection The use of cable matrices is recommended for soft conductors For installing the switch it is necessary to use an appropriate mounting bracket depending on the shape and size of the wall socket a Wiring diagrams SM10 SM11 SM12 SM20 SM40 SM41 SM61 SM62 SM60 SM60 SM60 SM70 SM60 b Illuminatio...

Page 3: ... switch terminals according to the wiring diagrams above If you want to illuminate the switch IAxx connect it according to the illumination circuit Use a suitable screwdriver SLPH2 to tighten the screws Slide the switch 3 into the bracket If you have a separate button 5 press it onto the switch In case you do not fill all the spaces on the bracket use a blank module TM21 or TM22 or use wide button...

Page 4: ... The manufacturer s warranty does not apply in the following cases use of the product in contravention of the manufacturer s instructions and in the event of non compliance with the safety instructions the use of the product for purposes other than those intended incorrect installation of the product mechanical damage and defects resulting from a fault of the manufacturer injuries and defects caus...

Reviews: