3
SM60 + SM70 + SM60
SM60 + SM70 + SM60
SM60 + SM70 + SM60
SM20
SM20
*unsuitable for LED and CFL loads
•
De-energize the system by switching off the fuse or main switch.
•
Remove the insulation on the conductors 11 mm in length.
•
Attach a suitable socket (2) to the mounting bracket (1).
•
Connect the appropriate conductors to the switch terminals according to
the wiring diagrams above. If you want to illuminate the switch (IAxx),
connect it according to the illumination circuit.
•
Use a suitable screwdriver (SLPH2) to tighten the screws.
•
Slide the switch (3) into the bracket.
•
If you have a separate button (5), press it onto the switch.
•
In case you do not fill all the spaces on the bracket, use a blank module
(TM21 or TM22) or use wide buttons (TM12).
•
Attach the cover (4) to the bracket using gentle pressure.
•
Connect the voltage and check the operation.
