myTEM SmartHome
Quick Guide Starter Set Light
In the next steps, the Z-Wave devices are
connected to the radio server.
To start this process, click on «GERÄTE HINZU-
FÜGEN».
Now the radio server is coupled with the Z-Wave
devices. The exact procedure is described in the
operating instructions of the device, which are
included in the starter set light.
Adding and loading the settings can take several
minutes.
Switch the radio bulb lamp on or off three times
(make sure that only one lamp is screwed into
the socket, if several lamps can be switched with
the switch).
For the radio socket, press the button four times
briefly (see picture on the right).