19
10. RS485
10.1. RS485 Setting
Baudrate : 2400/4800/9600/19200/38400/57600bps
Default : 9600
Data : 8 bit , 1 stop bit, no parity
10.2. Support Protocol
VISCA, PELCO-D, etc
11. I/O FUNCTION
11.1. D/N In & GND
External control trigger input may make camera to Day or Night mode.
Connect D/N input pin to GND to activate night mode or leave floating to deactivate.
OPEN(floating) : Day mode CLOSE: Night mode
11.2. MD Out
High level signal(5VDC) outputs through terminal when motion detection alarm occurred.
MD output use transistor, connect lower than 100mA load.
12. POWER
12.1. Power consumption
12 VDC
±
2 V
Alarm ON
Alarm OFF
+5V
GND
