Telycam TLC-100-HU2-10, User Manual

Page: 26 / 32

〓〓〓〓〓〓
OSD MENU
〓〓〓〓〓〓
— 24 —
IRIS
Iris setting: CLOSE~F1.8, only valid under
MANUAL and IRIS mode
Default: AUTO
GAIN
Gain setting: 0dB~30dB, only valid under
MANUAL mode
Default: AUTO
EXPOSURE
BRIGHT
Bright setting: 0~27, only valid under
BRIGHT priority mode.
Default: AUTO
BRIGHT 0~15 Default: 8
WIDE DYNAMIC
MODE
Optional: OFF, ON Default: OFF
WIDE DYNAMIC
LEVEL
1~6 Default: 1
BLC OFF/ON Default: OFF
IMAGE
WHITE
BALANCE MODE
Optional: ATW, MANUAL, AUTO, INDOOR,
OUTDOOR, PUSH, C.T.
Default: ATW
RED GAIN
Red gain level: 0~255, only valid under manual
white balance mode
Default: AUTO
BLUE GAIN
Blue gain level:0~255 , only valid under manual
white balance mode
Default: AUTO
COLOR
TEMPERATURE
Set the color temperature value: 2500~10000
only valid under C.T. mode.
Default: AUTO
FLICKER
Anti-Flicker setting:50/60HZ/OFF, to reduce the
video flicker
Default: 50HZ
DIGITAL ZOOM Optional: OFF, ON Default: OFF
FOCUS MODE AUTO, MANUAL Default: AUTO
QUALITY
2D NOISE
REDUCTION
2D noise reduction: the bigger value is, the less
noise on image is, the lower resolution is
Default: OFF
3D NOISE
REDUCTION
3D noise reduction: OFF/AUTO/0~4, the bigger
value is, the less motion noise on image is. High
value will cause image smear.
Default: AUTO
SHARPNESS
Sharpness setting: 0~15, the higher value is,
edge of the image will be sharpen
Default: 6
CONTRAST Set contrast level: 0~15 Default: 8
SATURATION Set saturation level: 0~15 Default: 8
GAMMA Select gamma level: 0~15 Default: 8
IMAGE STYLE Optional: USER, NORMAL, COLORFULL Default: USER