Telycam TLC-100-HU2-10, User Manual

Page: 13 / 32

〓〓
IR REMOTE CONTROLLER
〓〓
— 11 —
LED Function Instruction
Press any button and shows in red color: Current selection is to
control the camera;
Press any button and shows in green color: Current selection is to
control the codec;
Press any button and shows in blue color: Current selection is to
control the TV;
Power button
Red button : in normal work mode, short press one time, camera
will enter standby mode; short press again, the camera will start
self-configuration and go to HOME position; it will go to No.0
preset position if that was set;
Green button: Codec power button(need to learn the button
coding);
Blue button: TV power button( need to learn the button coding);
Focus (Left): +/-
Manual focus, only valid under manual focus model;
Zoom (Right): +/-
Control the lens zoom rate;
Navigate : Up/Down/Left/Right
In normal working mode, use navigate key to control pan/tilt;
Confirm/Home button:
In normal working mode, short press to let the camera go back to
Home position.
Menu button: show the camera version.
Number buttons
Set Preset: Long press(3seconds) the number button to save preset;
Clear Preset: Clear+number button to clear the relative preset;
Long press(3seconds) the Clear button to clear all preset;
Run Preset: Short press the number button to run the relative preset.