25
←
It's name of action and does not have any
effect on operation of action. It's just for easy
identification in case you have more than one
action. You are free to give any name using
text, numbers, special characters.
←
You can select the desired type of the output
when the action would be performed:
ON
,
OFF
,
TOGGLE
.
←
Choose relay number from 1 to 4.
←
This is the time for which the desired output
should be held high/low. If “0“ is entered, it
would mean a permanent change in status of
corresponding output.
←
To the effect that all configurations would be
performed, press button
SUBMIT
.
Picture 8.5.2.
8.5.2
Message
- Press button
. Then you will see the new item “no name” (picture 8.5.3). Click it and
configure parameters. Default type is
Short Message
. You can change it to
Phone Call
or
during
configuration.
Picture 8.5.3
