3
One of the easiest ways to receives images from camera, is to receive them into your e-mail box. For this
matter you need:
•
Activate sending to e-mail mode by sending SMS message with text "
EMAIL ON
" to SIM card
inserted in the camera.
•
Enter your GSM network e-mail server address and port (if not standard port is used) and send
SMS command "
SMTPIP
smtp.internet.net
" or "
SMTPIP
smtp.internet.net:25
" to
camera where
smtp.internet.net
is your GSM network e-mail server address.
•
Add your e-mail address to the list by sending SMS command to the camera: "
ADDEMAIL
", where
is your e-mail address.
Several commands can be entered in one SMS message (except command "
ADD
") if it does not
exceed 160 symbols. Commands must be separated by semicolon, e.g.: "
apn
gprs.internet.net; chapuser internet; chappasword connect; email on; smtpip
smtp.internet.net:25; addemail [email protected]
".
When camera receives commands, it returns confirmation or error message. When all confirmation
messages are received, user can order images. To do so, make a short call (up to 10 seconds) to
the camera or send the SMS message with the text "
PHOTO
" and wait until the images will be
sent to the e-mail box.
User can also make a phone call to camera and after 10 seconds camera will switch to area
listening mode.
If your PC has a constant external IP address and at least one open port, images from the camera can go
directly to the PC. For this you have to:
•
Send SMS command to camera "
WEB ON
" to enable
sending to server mode (Don’t forget to disable other
sending points! E.g. e-mail with command "
OFF
").
•
Send SMS command e.g. "
WEBIP
192.168.0.1:7989
", where
192.168.0.1
is the IP
address of your PC and
7989
is a selected port
number.
•
Run Observation Post software with File ->
Settings, set the same port and select the
directory for pictures archive. Click
to save the settings. Click “Listen” in the main
window to start port listening.
Now make a short call (up to 10 seconds) or
send a SMS message with text "
PHOTO
" to
camera and receive images into your computer.
If you sent a SMS command e.g. "
VIDEO
3
" to camera, you can set
camera to constant video mode for
3
minutes. Images receiving speed will
depend upon set picture format (quality). For more details about this and
other functions, please, read User Manual.
