2
I N T R O D U C T I O N
Teltonika GSM Camera – is a small mobile video monitoring system, that sends data through
GSM GPRS/EDGE channel.
The design of this device allows to connect camera to the PC through
COM port. When Teltonika GSM Camera is connected to the PC, the parameters and received
images can be configured. Teltonika GSM Camera supports the following data bearers: GPRS,
EDGE and SMS.
P A C K A G E C O N T E N T S
1)
Cardboard box.
2)
“Teltonika GSM Camera“ device.
3)
Power supply
4)
Connection to PC cable.
5)
GSM antenna.
6)
Mounting bracket.
7)
CD with software and User Manual.
8)
“Quick Start Guide”.
Note: the manufacturer does not provide SIM card, which is necessary for connecting
to the GSM network! SIM card can be obtained from your GSM operator!
If any of the components are missing, please contact the manufacturer representative or your local distributor.
H O W T O S T A R T ?
To start the work:
•
Configure camera settings using computer or by SMS
messages (read User Manual).
•
Fix the mounting bracket and fasten camera on it.
•
Connect to the system:
1.
External GSM antenna.
2.
Insert SIM card (with disabled PIN code or enter it
with the help of PC).
3.
External sensors.
4.
Power supply, plug it to the power supply source.
5.
Additional external camera if needed.
•
Focus camera lens gently using the PC with Camera
Configurator software (before focusing the lens make sure,
that low sharpness is not the result of enlarged UV ray
amount or radio frequency interference).
Example of camera configuration with SMS messages
•
System performs the commands received from authorised phone numbers. While the numbers list
is empty, firstly authorize the main user’s number. Only the
main user
can enter or change the
settings, add or delete additional users who may receive alarm SMS messages and order the
filming session. Send SMS message with text "
ADD
" to SIM card placed in the camera and the
number from which the message was sent will be the
main user.
•
Access point has to be entered in order to be able to send data through GSM GPRS/EDGE network
to the camera. For that matter send SMS message with the text, e.g.: "
APN
gprs.internet.net
", where
gprs.internet.net
is the access point of your GSM network provider.
If authorization is used in your network, additionally user name (chapuser) and password
(chappasword) has to be set. For that matter use SMS command: "
CHAPUSER
internet
",
"
CHAPPASWORD
connect
", where
internet
and
connect
stand for user name and password
that were set by your GSM network operator.
i
i
i
i
