Teltonika GH3000, User Manual

Page: 11 / 39

Quick-Start user manual version 1.00
5. Quick configuration via SMS
Quick configuration alows configurate your device without any
connection to the PC, just send simply SMS messages to the
device and it will be ready to work.
If configuration message is correct device will answer you
confirmation SMS message back, o
th ervice it will not answer at
all. The separator of commands and parameter values is the
space bar.
5.1 Change configuration password
5.2 Change time and time zone
Before start configuring the device you need to create your own
configuration password or leave it by default. To create your own
configuration pasword is not ne cess ary but recomended.
Dafault configuration password is “ 0000 ” . For creating
configuration password use only (aA-zZ) and (0-9) symbols.
psw <old configuration password> ch <New configuration
password>
Example:
Result: before password 0000 after 1111 psw 0000 ch 1111
Notice !
Remember your created password, o the rvice you will not be able to change any configuration
parameters of the device.
If the device never had a coordinate before, the default time in
the device will be incorrect (2007 01 01). To synchronize internal
time you need to get a first
coordinate. P ut the device for a few
minutes o n the open sky and wait until GPS indicator stars
flashing twice at a time . After synchronization device time will
be GMT(00:00). To set your local time send SMS message:
psw <configuration password> gmt <+-number>
E xample: psw 0000 gmt+2
Result: before GMT time 10:23:22 after local time 12:23:22
8