Teltonika GH3000, User Manual

Page: 19 / 39

Quick-Start user manual version 1.00
7.8 Prepare your computer
Chargers, personal or portable computers to be connected to the
device must comply with the requirements of DIN EN 60950-
1.2003.
7.9 Use only the batteries supplied by the manufacturer
If a battery of an improperly sort is inserted, there is a possibility
for explosion or other harms.
7.10 Use the battery safely
Ensure that the battery doesn't have a contact with water. When
storing, keep the device in a cool, dry place.
Ensure that the battery and device are not exposed to hot
surfaces or direct sunlight.
When transporting, ensure that the battery is safe from metal
articles and do not keep it with metal rings, chains, etc.
Do not damage the battery with nails or sharp objects.
Do not try to charge the battery directly from a household
socket. This may lead to explosion or other harms.
7.11 Safely disconnect the device
The device may be disconnected from the PC or charger by
pulling out the USB connection from the computer USB socket or
by pulling out the micro USB connection from GH3000.
To avoid mechanical damages, it is advisable to carry the
equipment in a blow-proof package.
The operation environment of the device has effect on its
communication quality. If the operation of the device has been
disturbed, only qualified maintenance staff may do the repair. It
is recommended to deliver the device to a repair center or back
to the factory.
Power supply chains available at a place used for connecting
GH3000 must have safety devices (automatic bipolar switch off
devices) which protect from power supply excess, short circuit
and failure of grounding. The switch off device must be installed
at a place which is easy to access. Its power must be consistent
with the power of the connected device, and the distance
between the contacts must not be less than 3 mm.
16