80
FM Log Mode
This is default mode of the FM5500. It is suitable for debugging.
LLS Mode
12.5.1.1
LLS Mode Configuration
1.
External Devices->COM1 Settings->Baudrate = 19200
2.
External Devices ->COM1 Settings->Mode = LLS
3.
External Devices ->COM2 Settings->Baudrate = 19200
4.
External Devices ->COM2 Settings->Mode = LLS
Note
On COM1: Level will be with ID:201 Temperature will be with ID:202 On COM2:
Level will be with ID:203 Temperature will be with ID:204.
On Valid data Receive Status LED will blink.
12.5.1.2
LLS Polynoms Configuration
If additional accuracy is required, LLS fuel sensors can be configured. For polynoms
configuration to work both LLS on COM1 and COM2 must be selected. As that is done
“Advanced LLS setup” can be clicked. (Figure 71)
Figure 71 LLS Polynoms Configuration