![background image](http://html1.mh-extra.com/html/navman/sport-tool-m300/sport-tool-m300_quick-start-manual_3751081001.webp)
Use the modes
Normal operating modes
Use the settings
Setting options
QUICK START GUIDE
NAVMAN
Press and hold to enter setup
Press repeatedly to step through the setting options.
Press both buttons together (
) to start or stop editing
a setting option.
While editing, press or repeatedly to step through selectable states,
or increase/decrease values. Press and hold the appropriate button to
increase/decrease values quickly.
Set (12hr)
lets you set 12hr or 24hr time format
Set (31-12)
lets you set dd-mm or mm-dd date format
Beep
When beep is «ON» a beep will sound when the buttons are
pushed.
Set units (knots)
lets you set speed units to «knots», «km/h» or «mph»
Distance is displayed in units corresponding to the speed units, i.e. if you
choose «knots» for speed units, then distance is displayed in nautical
miles.
Set offset
lets you adjust the M300 to display local time
The date is displayed to ensure that time adjustments are made in the
correct direction, i.e. both correct time and correct date should be
displayed. GPS signals must be obtained to set local time.
Press and hold to leave setup
Press to start normal operation
Press repeatedly to step through the modes (hold to
cycle automatically through modes).
Speed
shows session distance and current speed
Speed (AVG)
shows session distance and average speed
Speed (MAX)
shows session distance and maximum speed
Odometer mode
shows total distance from last odometer reset
Heading mode
shows current heading in degrees from true North
Clock
shows the current time and date
(You may need to adjust the settings to display your local time.)
Timer
shows session and lap times
The timer starts automatically whenever you start moving and stops
whenever you stop moving.
Timer Recall
lets you recall stored lap data. Repeatedly pressing recalls
lap data starting from the last stored lap, then lap 1, 2, 3 etc.
Press and hold to shut down the M300
*
KEY
= press this button
= press this button
= press both buttons together
= press and hold both buttons together
M300 — Settings
NAVMAN
NAVMAN
NAVMAN
M300 — Settings
M300 — Modes
M300 — Modes
KEY
= press this button
= press this button
= press both buttons together
settings
editing details
beep
beep
beep ON
beep OFF
set units (knots)
set units (km/h)
set units (knots)
set offset
set 12hr
set 31-12
set 24hr
set 12-31
set units (knots)
set (12hr)
set (12hr)
set (31-12)
set (31-12)
time (date)
edit
accept
� �
edit
accept
edit
accept
edit
accept
edit
accept
set units (mph)
modes
operating details
Speed (AVG)
Speed (MAX)
Speed
Clock
Timer
Odometer
clear all session data*
Timer recall
Heading
store current lap data
clear max speed only
clear odometer only
restart recall from lap 1
recall lap data
(*does not clear odometer)
�
�
�
�
�
RCL
AVG
MAX
8 7 23
�
clear all session data*
clear all session data*
clear all session data*
store current lap data
store current lap data
store current lap data
store current lap data
store current lap data
store current lap data
S
N