ISDN Demonstrator User’s Manual
40-400-00011, Rev. B
12
installation until complete. A Program Window will be created that is labeled
ISDN Demonstrator Configuration and includes an icon labeled ISDN
Demonstrator Configuration. Double click on this icon to start the software
(see Figure 1) and provision the ISDN Demonstrator.
Figure 1. Configuration Software
The ISDN Demonstrator Configuration software will attempt to query the
ISDN Demonstrator via COM1, the default communications port. If a serial
cable is connected to COM1 and the ISDN Demonstrator, the loaded
configuration will appear on the screen. If an error message appears, follow
the instructions as required. i.e. If the communications port is other than the
default of COM1, select another port as necessary. When a valid query has
been completed, the Configuration Name will appear as QUERY, with Switch
and Line Provisioning settings shown. No attempt to compare against a
stored value is done. Two message boxes at the bottom of the screen will aid
the user in provisioning of the ISDN Demonstrator. The lower left hand
message box will display status messages at different times, such as
QUERY, DOWNLOAD, National ISDN-1 defaults, and other messages. The
lower right hand message box provides short messages about the feature
under the cursor, such as, Save User configuration, when the cursor is over
the Save button. It also displays a time bar when downloading or querying.
