41
12.
Advanced settings
12.1
Base settings
12.1.1
Change PIN
Some functions are protected by a 4 digit PIN code which must be entered if the
settings are changed. The default depends on the base. The PIN can be changed to
a preferred number.
When entering a PIN, the digits are shown as ****
1. Press
Menu
, scroll to
Advanced
Settings
and press
Select
.
2.
Base Settings
is highlighted. Press
Select
.
3.
Change PIN
is highlighted. Press
Select
.
4. Enter the old PIN and press
OK
.
5. Enter the new PIN and press
OK
.
6. Re-enter the new PIN and press
Save
.
7. Press to return to standby.
Note
The default PIN is 0000.
12.1.2 Base version
1. Press
Menu
, scroll to
Advanced
Settings
and press
Select
.
2.
Base Settings
is highlighted. Press
Select
.
3. Scroll to
Base Version
and press
Select
.
4. The Firmware and Hardware Versions, Serial Number and MAC address will be
displayed.
5. Press to return to standby.
12.1.3 Restore base default settings
1. Press
Menu
, scroll to
Advanced
Settings
and press
Select
.
2.
Base Settings
is highlighted. Press
Select
.
3. Scroll to
Base Reset
and press
Select
.
4.
Confirm?
is displayed. Press
Yes
to confirm or
No
to cancel.
Note
If you reset the base settings all the base settings will return to their default
settings, e.g. intrusion call and recall mode settings.
Resetting the base to default settings will also impact the following:
• Date & time.
• Contacts list will be cleared.
• Calls List will be cleared.
• Answer machine messages will be cleared.
Advanced settings
